Secure the top part of the “The STICK HANDLER” to the blade (approx 1-2 inches above the shaft). Bring the pull handle to the top position and secure the shaft to the bottom part of “The STICK HANDLER”.
	Make sure that the “The STICK HANDLER” is well secured..(the use of pliers to snug it up is suggested).
	Apply heat for 40-60 seconds to the shaft and blade area with a 1500 watt heatgun. Heat all four sides equally. When the shaft and blade has warmed up, apply a downward motion on the “The STICK HANDLER” handle.
	Stick blade is removed in 60 seconds or less with no stress on the stick shaft. Change a blade between periods or shifts easily with the “The STICK HANDLER”