Home
Liquid Hockey Tape
Pocket Drill Book
Pocket Coaching Board
Coaching Planner
Virtual Coach
Russian Box
Pro Hockey Posters
Derek Schooley's Developing Defensemen
Hockey Speed and Power
Translator / Traducteur
Submit a Drill
Feedback
Tell a Friend about this page
Secure the top part of the
“The STICK HANDLER”
to the blade (approx 1-2 inches above the shaft). Bring the pull handle to the top position and secure the shaft to the bottom part of
“The STICK HANDLER”
.
Make sure that the
“The STICK HANDLER”
is well secured..(the use of pliers to snug it up is suggested).
Apply heat for 40-60 seconds to the shaft and blade area with a 1500 watt heatgun. Heat all four sides equally. When the shaft and blade has warmed up, apply a downward motion on the
“The STICK HANDLER”
handle.
Stick blade is removed in 60 seconds or less with no stress on the stick shaft. Change a blade between periods or shifts easily with the
“The STICK HANDLER”